Baldor ZDNM3661T 3HP, 1760RPM, 3PH, 60HZ, 184TC, 0632M, TENV, F1 ELECTRONIC MODULES (CONTROLS)

Baldor ZDNM3661T 3HP, 1760RPM, 3PH, 60HZ, 184TC, 0632M, TENV, F1 ELECTRONIC MODULES (CONTROLS)Specs Catalog Number ZDNM3661T Enclosure TENV Frame 184TC Frame Material Iron Frequency 60. 00 Hz Motor Letter Type Three Phase Output @ Frequency 3. 000 HP @ 60 HZ Phase 3 Synchronous Speed @ Frequency 1800 RPM @ 60 HZ Voltage @ Frequency 230. 0 V @ 60 HZ 460. 0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals UR CSA Ambient Temperature 40 C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator

CEM3664T SPEC 06F057W970G1 HP 2 VOLTS 230/460 AMPS 6

LC Frame Material Steel Frequency 60

Catalog Number ECTM3770T Enclosure TEAO Frame 213T Frame Material Iron Frequency 60

Catalog Number ECP4402T Enclosure TEFC Frame 405TS Frame Material Iron Frequency 60

Power Factor 13

Standard NEMA MG-1 Frequency 60 Hz Voltage 208-230/460 V Number of poles 4 Degree of Protection IP55 Synchronous speed 1800 rpm Output rating 7

125 IN Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator Shaft Slinger Speed 1775 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None XP Temp Code T3C Drawings

A44-7127-4245 HP 250 RPM 1785 DRIVE END BEARING 90BC03J30X OPP D

automatic Shaft Material SAE 1040/45 Carbon Steel Painting RAL 5009 207A (ISO 12944 - C2) Grounding Lugs Single Fan Cover material Steel Tropicalized Painting Without Fan material Plastic Bearing cap Yes- Bearing Cap Drip Cover Without Overload protector (phenolic) Without overload protector Connection Cables Quantity 12 Features

0 A Rated torque 296 ft

Frame 404/5TSC Output 100 HP (75 kW) Number of Poles 2 Frequency 50 Hz Rated speed 2965 rpm Slip 1

8 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Duty KVA Code H Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Max Speed 2700 rpm Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 3 @ 14 AWG Motor Type 0748M Mounting Arrangement F1 Number of Poles 4 Overall Length 20