Bando 4-5MS730 Banflex Combo, 2 BELTS/2 RIBS EACH TIED SWITCHESBando 4 5MS730 Ideally suited for short center distances and small diameter pulleys, BanFlex Combos banded construction minimizes or eliminates the turnover problem normally associated with small cross section belts. The ribbed construction provides superior flexibility while maintaining lateral stability. Precision molded, seamless polyurethane ribs provide maximum resistance to oil and traditional lubricants with virtually vibration free operation.
APPLICATION Pushbuttons and Pilot Lights TYPE Spare - AF NUMBER OF POSITIONS 5 Positions - Line CSW F Attributes
lb Locked rotor torque 250 % Breakdown torque 320 % Locked rotor time 64s (cold) 36s (hot) Moment of inertia (J) 0
22 LB-FT Pull-Up Torque 27
422 Line Amps 2
Standard NEMA MG-1 Frequency 60 Hz Voltage 460//380-415 V Number of poles 8 Degree of Protection IP55 Synchronous speed 900 rpm Output rating 15 HP Mounting B3L(E) Flange Without Terminal box¹ Right position Enclosure IC411 - TEFC
35 SHIPPING WEIGHT 22 THERMAL PROTECTION AUTOMATIC RESET BREAKDOWN TORQUE 49
Model_Number J209 PRODUCT NAME 40 HP - - 3475 PHASETYPE 3_PHASE HORSEPOWER 40 KILOWATTS 29
9 POLES 4 NUMBER SPEEDS 1 RPM 1780 RPM 2 1780 HERTZ 60 VOLTS PRIMARY 230/460 VOLTS 460 VOLTS 2 230 FRME 256 SHAFT CODE TC MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE TCBI OPPOSITE END BEARING 6309-J/C3 SHAFT END BEARING 6310-J/C3 AMBIENT 40 SERVICE FACTOR 1
Load 76° C Start Configuration DOL Break-Down Torque 330 LB-FT Pull-Up Torque 142 LB-FT Locked-Rotor Torque 178 LB-FT Starting Current 270 A Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S
2 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Not Inverter KVA Code K Lifting Lugs No Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 8 @ 18 AWG Motor Type 3528L Mounting Arrangement F1 Number of Poles 4 Overall Length 13
25 MOUNTING STUD/BAND MOTOR TYPE FHP OPPOSITE END BEARING SELF-ALIGN SHAFT END BEARING SELF-ALIGN AMBIENT 60 ROTATION REVERSIBLE SERVICE FACTOR 1 RUNCAPMFD 5 RUNCAPVOLTS 370 SHIPPING WEIGHT 12 THERMAL PROTECTION AUTOMATIC RESET BREAKDOWN TORQUE 20
at Drive end and Non-drive end Main terminal box hole 2xM63x1
