1X12X144FSBMT skid steer

1X12X144FSBMT skid steer1" x 12" x 144" Flat single bevel, weld on cutting edge. Good to weld under the front edge of your bucket to give it a wear surface or to replace the front lip of your bucket. If it becomes the new front lip of your bucket you can drill or blow holes in it to match a bolt on edge if you like. LOCAL DELIVERY OR PICK UP ONLY with online sales. If you want motor freight delivery call to arrange.

This is a p335 slotted pin for use with 335 series teeth

(not the snow/mulch bucket)

This bolt on side cutter (can be welded on) is for loader buckets and has an industry standard part number of 253-0063 and are for Caterpillar 950-963 models

This bolt on side cutter (can be welded on) is used on excavator buckets is an esco style and has an industry standard part number of t1156a

3/4" x 6" x 108" Flat single bevel

Its OD is 140mm and length is 90mm

This Pin Removal Tool is used to remove pins from bucket teeth

WEAR BUTTON 23/8"

This is a 45lk lock for use with 45s series bucket teeth

SPRING-LOADED TPU SEAL: Inflate tires with or without the valve core in place

This is a 27lk "horseshoe" lock for use with 27syl series bucket teeth

Use a v23pn pin with this tooth