Imperial Hexagonal Bolt Partial Thread Zinc Plated 1-1/4-7 * 7" Grade 5 Quantity:Unity

Imperial Hexagonal Bolt Partial Thread Zinc Plated 1-1/4-7 * 7" Grade 5 Quantity:UnityThis hexagonal bolt has a length of 7 with a threading of 1 1 4 7 [Partially Threaded]. It is made of zinc plated and thus provide medium resistance to corrosion in both dry and wet environments. The Grade 5 increases its strength against the pressure and has a tensile strength and hardness of 120,000 psi Rockwell C25. Furthermore, it features a shear strength of 72,000 psi. UNC Coarse threads are an industry standard. These bolts are classified as

This hexagonal bolt has a length of 9 with a threading of 1-8 [Partially Threaded]

The Grade 5 increases its strength against the pressure and has a tensile strength and hardness of 120

Black-oxide steel screws are mildly corrosion resistant in dry environments

A nyloninsert grips the bolt to resist loosening without damaging threads

This hexagonal bolt has a length of 9 with a threading of 1-1/2-6 [Partially Threaded]

This carriage bolt has a length of 3" with a threading of 7/16-14 [Fully Threaded]

This hexagonal bolt has a length of 6 with a threading of 1-1/2-6 [Partially Threaded]

This hexagonal bolt has a length of 5" with a threading of 1-8 [Partially Threaded]

This hexagonal bolt has a length of 6-1/2 with a threading of 7/8-9 [Partially Threaded]

The nuts have a thread of 1-1/2-6

but their holding power lessens with each use

ASTM A574M