Bando TL48-S14M-40 STS TL Timing Belt Pulley (3020) CENTRIFUGAL PUMP - TEFCBando TL48 S14M 40 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
Weil-McLain511-330-193
10H412Z624G1 HP 25 RPM 1770 VOLT 230/460 AMP 60/30 RATING 40C AMB-CONT TEMP CODE T3C TEMP = 160 CT HZ FROM 1
13 LOCKED ROTOR TORQUE UOM OZFT INSULATION CLASS F KVA CODE LETTER E LOCKED ROTOR AMPS 69
Frame 215YZ Output 10 HP (7
Tolerance± 15 PSI
Standard NEMA MG-1 Frequency 60 Hz Voltage 208-230/460 V Number of poles 4 Degree of Protection IP55 Synchronous speed 1800 rpm Output rating 75 HP Mounting F-1 Flange Without Terminal box¹ Left position Enclosure IC411 - TEFC
5 % Feedback Device NO FEEDBACK High Voltage Full Load Amps 174
500 A @ 200
0 a Heater Indicator No Heater Insulation Class F Inverter Code Not Inverter IP Rating NONE KVA Code K Lifting Lugs No Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Termination Flying Leads Motor Type 3420M Mounting Arrangement F1 Number of Poles 4 Overall Length 14
Standard NEMA MG-1 Frequency 60 Hz Voltage 575 V Number of poles 6 Synchronous speed 1200 rpm Output rating 3 HP Mounting F-1 Flange C Terminal box¹ Left position Enclosure IC01 - ODP Electric Motors
VJPFPM2547T SPEC
7 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code M Lifting Lugs No Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 18 AWG Motor Type 3522M Mounting Arrangement F1 Number of Poles 4 Overall Length 11
