Socket Head Cap Screw Black Steel 3/4-10 * 9" Grade 8 [Cup Point] [Allen Drive] thread_size_2-1-4-12

Socket Head Cap Screw Black Steel 3/4-10 * 9" Grade 8 [Cup Point] [Allen Drive] thread_size_2-1-4-12With a tensile strength of 170,000 psi, these alloy steel screws are stronger than Grade 8 steel screws. Length is measured from under the head. The screws have a thread of 3 4 10 and a length of 9. Black oxide steel screws are mildly corrosion resistant in dry environments. Coarse threads are the industry standard: choose these screws if you dont know the pitch or threads per inch. Screws that meet ASTM A574, ASTM A574M, and ISO 898 1 comply with

This hexagonal bolt has a length of 6-1/2" with a threading of 7/8-9 [Partially Threaded]

These tie downs meet D

This hexagonal bolt has a length of 8-1/2" with a threading of 1-1/2-6 [Partially Threaded]

The bolts have a thread of 5/8-11 and a length of 8

This hexagonal bolt has a length of 5" with a threading of 3/4-16 [Partially Threaded]

This hexagonal bolt has a length of 4-1/2" with a threading of 1-1/4-12 [Partially Threaded]

but the capacities will be significantly reduced

These must be oriented with the saddle on the long (live) end and U-bolt on the short (dead) end

This hexagonal bolt has a length of 6-1/2" with a threading of 1-1/8-7 [Partially Threaded]

The screws have a thread of 1-8 and a length of 18

This hexagonal bolt has a length of 4-1/2" with a threading of 3/4-10 [Partially Threaded]

This hexagonal bolt has a length of 4" with a threading of 1-1/4-7 [Partially Threaded]