AXYZ - 029825 Overload Protector 22 - 28AMP Spindle

AXYZ - 029825 Overload Protector 22 - 28AMP SpindleUsed with contactor 029819 Motor Overload Protectors are not used on the control panels but are installed on all contactors controlling pumps, drills, and other peripheral device motors. These devices ensure that a motor does not overheat and start a fire; so it is vital the correct device is used and it is set properly. Motor overload protectors are available in a number of sizes and ranges. The current range must be set to 25% higher than the rated

In kits: 1-14235 & 1-15565

Compatible with all HyPrecision 15/30/50 and all S series 50/60/75 pumps and Predictive P-15/P-30/P-50 pumps & P-50S/P-60S/P-75S pumps made after February 16th

This is the valve body used in some Cutting Heads

PN -GUN-VORTEX-COLD

The 3 hp ELTE Spindle is a high powered general purpose collet spindle that uses ER25 collets

so you can scan for the dots

5D strategies such as V-Carving

Online training sessions can be purchased in 1-hour increments

Overall Length: 1 1/2"

Acculine - 1-11007-011

a failed console can be restored simply by replacing the cable

Wooden Dowel