Lee Collet 2-Die Set – .17 Remington brand_-Pete Wadeson

Lee Collet 2-Die Set – .17 Remington brand_-Pete WadesonThe Lee Collet 2 Die Set for . 17 Remington is designed for reloaders who want to maximise case life and keep their ammunition as accurate as possible. Unlike full length sizing dies, the collet neck sizing die works by drawing a steel mandrel through the case neck using a collet that grips from the outside, sizing only the neck and leaving the body fireformed to the chamber. The result is minimal brass work hardening, straighter case necks, and

FX introduced this valve as standard fitment from late 2012

and can be taken out where the base doesn't need it

30-calibre option with deep

These Hornady 25 Cal

will not set off a metal detector

so you see exactly where the shot landed without walking downrange or reaching for binoculars

Fitted with a UK three-pin plug

It is the correct choice for owners of FX rifles fitted with the adjustable airtube regulator who want to carry out their own regulator service

so you can close it down over a base layer or tuck it under a jacket cuff to seal out wind and rain

This variant sets the rings at 27mm (standard) height and is finished to 30mm ring diameter to suit scopes and add-on units with that tube size

adjustable from 60cm to 81cm

traditional set for anyone who wants their shotgun looked after properly between outings