COMP Cams - Valve Spring Retainers for LS1

COMP Cams - Valve Spring Retainers for LS1Valve Spring Retainer 7 Degree 1. 070 in 0. 690 in OD Steps 1. 430 1. 460 in Dual Spring Chromoly Black Oxide GM LS Series Set of 16

5 in OD - 11 in Length - 1150 lb/in Spring Rate - Front - Red Powder Coat - Each

75 in Opening - Weld-On - Aluminum Bung - Aluminum Threaded Cap - Black Anodized - Kit

Motor Oil - GP-1 Nitro 70 - 70W - Semi-Synthetic - 1 gal Jug - Set of 4

AN Hose Assembly - 12 in Long - 3 AN Hose - 3 AN Straight Female to 3 AN 90 Degree Female - Braided Stainless - Black Vinyl Coated - PTFE Lined - Each

750 in Long - Steel - Natural - 700R4 / TH350 / Bert / Brinn / Muncie / Saginaw - Each

that there is over 40 feet of conductor wrapped into a single foot of plug wire

Spindle Duct - Spindle Mount - Passenger Side - Single 3 in Tube - 9 in Long x 4

810 in Bore - Drop in - 1/16 x 1/16 x 3/16 in Thick - Low Tension - Ductile Iron - Plasma Moly - 1-Cylinder - Each

Rod End - XM Series - Spherical - 1/2 in Bore - 1/2-20 in Right Hand Male Thread - PTFE Lined - Steel Ball - Chromoly - Zinc Oxide - Each

nitrous oxide or any other accessory that requires momentary power

00-inch mandrel-bent tailpipe exits out behind the rear passenger side tire and is finished off with a large 4

Fitting - Adapter - Straight - 16 AN Male to 16 AN Male O-Ring - Aluminum - Black Anodized - Each