Bando P38-14M-115 HT QD Timing Belt Pulley (SF) Unit BearingBando P38 14M 115 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
39 FULL LOAD AMPS PRIMARY 16
Frame 182/4T Output 1 HP (0
Model_Number P063ELD5017013J PRODUCT NAME 1 HP - - 3450 PHASETYPE 3_PHASE HORSEPOWER 1 KILOWATTS 0
4 RPM 1755 FRAME 56 SER
625 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator No Slinger Speed 3450 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 Automatic Thermal Overload Winding Thermal 1 Location SB Winding Thermal 2 None Drawings
7 a Number of Poles 2 Overall Length 35
CAT NO IDVSM4115T SPEC
8-1/8" Min B
Model_Number J063BGJ0135015B PRODUCT NAME
1 RPM 1755 FRAME 182TC SF 1
94 FULL LOAD AMPS PRIMARY 0
8 a Heater Indicator No Heater Insulation Class F Inverter Code Not Inverter IP Rating IP55 KVA Code G Lifting Lugs Standard Lifting Lugs Motor Lead Quantity/Wire Size 3 @ 4 AWG Motor Type A36062M Mounting Arrangement F1 Number of Poles 4 Overall Length 33
