Baldor VEM3709T-5 7.5HP, 3470RPM, 3PH, 60HZ, 213TC, 3646M, TEFC WD All SD Non-Encapsulated

Baldor VEM3709T-5 7.5HP, 3470RPM, 3PH, 60HZ, 213TC, 3646M, TEFC WD All SD Non-EncapsulatedSpecs Catalog Number VEM3709T 5 Enclosure TEFC Frame 213TC Frame Material Steel Frequency 60. 00 Hz Motor Letter Type Three Phase Output @ Frequency 7. 500 HP @ 60 HZ Phase 3 Synchronous Speed @ Frequency 3600 RPM @ 60 HZ Voltage @ Frequency 575. 0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals NEMA_PREMIUM UR NEMA PREMIUM CSA EEV Ambient Temperature 40 C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None

64 RPM 1725 FRAME 56 SER

7 VOLTS 230 RPM 1800 HZ 60 BEMF (V) 126 LD (MH) 13

232 lb Downloads

3 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Not Inverter IP Rating NONE KVA Code L Lifting Lugs No Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 6 @ 18 AWG Motor Type 3531M Mounting Arrangement F1 Number of Poles 4 8 Overall Length 14

10 A Rated torque 7

Start Type Direct Single-phase Maximum Power Rating Not applicable Rated operational voltage Ue<=600V Control voltage 180-208V50HZ/208-240V60HZ Control devices A-On-Off Button Degree of protection TYPE4X Starters Complements Does Not Contain Rated current (AC-3) 12A (CWB12) Overload relay 8-12

67 % Rated voltage 240/415 V Rated current 3

0x(Code K) No load current 27

0 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code H Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 12 AWG Motor Type 3942M Mounting Arrangement F1 Number of Poles 4 Overall Length 23

375 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator Shaft Slinger Speed 1770 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding Normally Closed Thermostat Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings

Rated current 25 A Reference CWM Main contact 3 NO Control voltage 400-415V 50Hz/480V 60Hz Terminal type Screw Attributes

Standard NEMA MG-1 Frequency 60//50 Hz Voltage 230/460//190-220/380-415 V Number of poles 4 Synchronous speed 1800 rpm Output rating 20 HP Mounting W-6 Flange C Terminal box¹ Left position Enclosure IC01 - ODP Electric Motors