Fasco D0960 Rectangular Outlet Shaded Pole OEM Replacement Draft Inducer Blower, 115 Volts, Flange: Yes AUXILIARY CONTACTS BLOCKS

Fasco D0960 Rectangular Outlet Shaded Pole OEM Replacement Draft Inducer Blower, 115 Volts, Flange: Yes AUXILIARY CONTACTS BLOCKSOEM Direct Replacement Draft Inducer Blower 3. 3" Diameter Shaded Pole Thermally Protected Open Air Over Class B Insulation, 40C Ambient Sleeve Bearing 5. 5 4. 5" Leads with Socket Terminals Additional Information Motor TypeShaded Pole Thermal ProtectionThermally Speed3000 rpm Current1. 5 A Number of Speeds1 Ambient Temperature40 C ULYes Insulation ClassB CSAYes Blower Outlet ShapeRectangle Motor EnclosureOpen Blower Outlet FlangeYes Bearing

lb Locked rotor torque 130 % Breakdown torque 200 % Locked rotor time 21s (cold) 12s (hot) Moment of inertia (J) 39

A&J Motor Type 3528L Mounting Arrangement F1 Number of Poles 2 Overall Length 12

875 IN Shaft Extension Location Pulley End Shaft Ground Indicator Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator Shaft Slinger Speed 1760 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings

75 kW) Number of Poles 6 Frequency 50 Hz Rated speed 950 rpm Slip 5

9 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class H Inverter Code Inverter Ready KVA Code M Lifting Lugs No Lifting Lugs Locked Bearing Indicator Locked Bearing Max Speed 6000 rpm Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 18 AWG Motor Type 3512M Mounting Arrangement F1 Number of Poles 4 Overall Length 11

Enclosure IC01 - ODP Mounting F-1 Rotation¹ Both (CW and CCW) Noise level² 68

Standard NEMA MG-1 Frequency 60 Hz Voltage 460//380-415 V Number of poles 2 Degree of Protection IP55 Synchronous speed 3600 rpm Output rating 150 HP Mounting B3L(E) Flange Without Terminal box¹ Right position Enclosure IC411 - TEFC

1 POLES 2 NUMBER SPEEDS 1 RPM 3505 RPM 2 3505 HERTZ 60 VOLTS PRIMARY 230/460 VOLTS 460 VOLTS 2 230 FRME 143 SHAFT CODE T MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE LCE OPPOSITE END BEARING 6203-2Z-J/C3 SHAFT END BEARING 6205-2Z-J/C3 AMBIENT 40 ROTATION DUAL SERVICE FACTOR 1

Model_Number FB44 PRODUCT NAME 50 HP - TEFC - 1780 PHASETYPE 3_PHASE MOTOR ENCLOSURE TEFC HORSEPOWER 50 KILOWATTS 37

5 HP - TEFC - 1725 PHASETYPE 1_CAPACITOR START MOTOR ENCLOSURE TEFC HORSEPOWER

42 IN Power Factor 69 Product Family General Purpose Pulley End Bearing Type Ball Pulley Face Code Resilient Mount Pulley Shaft Indicator Standard Rodent Screen None Service Factor 1

0 A Rated torque 133 ft