Bando SPA1632 Metric V-Belts Refrigeration MotorsBando SPA1632 In addition to belts manufactured to ARPM (Association for Rubber Products Manufacturers) standards, Bando produces belts to European standard DIN 7753 and ISO4184. These standards are based on the metric system of measure and have different cross section designations. The Narrow Wedge profile allows for higher speed ratios, shorter center distances, and more compact drives. They are direct replacements for belts on imported machinery
Standard NEMA MG-1 Frequency 60 Hz Voltage 460 V Number of poles 6 Degree of Protection IP55 Synchronous speed 1200 rpm Output rating 75 HP Mounting F-1 Flange Without Terminal box¹ Left position Enclosure IC411 - TEFC
Packard - C325C
Start Type Direct Three-phase Maximum Power Rating Not applicable Rated operational voltage Ue<=600V Control voltage 380V50/60HZ Control devices E-Reset Degree of protection TYPE1 Starters Complements Does Not Contain Rated current (AC-3) 25A (CWB25) Overload relay 15-23 A (RW27) Measuring tool and accessories Not Applicable Button type Unspecified Button color Not Specified Connection Type Not Applicable Downloads
Degree of Protection IP55 Enclosure IC411 - TEFC Mounting B3L(E) Rotation¹ Both (CW and CCW) Noise level² 43
lb Locked rotor torque 220 % Breakdown torque 270 % Locked rotor time 54s (cold) 30s (hot) Moment of inertia (J) 0
40G048X351 HP 30 RPM 1775 VOLT 575 AMP 29 RATING 40C AMB-CONT NEMA-NOM-EFF 94
5 HP - ODP - 3450 PHASETYPE 1_PERMANENT SPLIT CA MOTOR ENCLOSURE ODP HORSEPOWER 1
4 POLES 4 NUMBER SPEEDS 1 RPM 1725 HERTZ 60 VOLTS PRIMARY 115 VOLTS 115 FRME 56 STATOR DIAMETER 5
Frame 213/5T Output 5
6 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class B Inverter Code Not Inverter KVA Code J Lifting Lugs No Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 6 @ 18 AWG Motor Type 3421L Mounting Arrangement F1 Number of Poles 4 Overall Length 11
D XP Division Division I Agency Approvals CSA EEV UL Ambient Temperature 40 °C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Blower None Constant Torque Speed Range 6 Current @ Voltage 42
17 % Rated voltage 415 V Rated current 75
