Attwood Automatic Float Switch w/Cover - 12V & 24V [4201-7] Marine Hardware | Accessories

Attwood Automatic Float Switch w/Cover - 12V & 24V [4201-7] Marine Hardware | AccessoriesFloat Switch w Cover Part #: 4201 7 Converts bilge pumps to fully automatic operation. Maximum amp draw is 12 amps (at 12 volt D. C.) or 6 amps (at 24 Volts D. C.). Features a compact, low profile design that mounts on any surface from a horizontal up to a 24" angle. Incorporates a reliable and affordable mechanical switch that actuates pump motor at 2" water level. Wire leads do not flex or hinge with the float as on some competitive models. Integral

Gear Ratio 6

Mono line capacity lbs/yds: 8/240

all locking tools

Simply snap the buttons on the back of the insert bags into any free hole on the Bogg Bag (inside or outside) to keep smaller items in reach

A drain plug in the bottom casting is provided for easily removing sediment and draining for winterizing

Input for MOB switch/system –when activated generates synthetic AIS MOB NMEA output to activate MOB position on plotter

Top-mounted

The precision diving-lip takes the X-Rap Magnums deep

Sealed Lid

Bandit: 100~200

Power: Extra Heavy

UPC: 9420024128701